A village-level pigeonpea processing machine for Sri Lanka

Pigeonpea processing machine

Authors

  • H M NIMAL JAYANTHA Field Crops Research and Development Institute, Department of Agriculture, MahaIlluppallamma, Sri Lanka
  • K B SAXENA Field Crops Research and Development Institute, Department of Agriculture, MahaIlluppallamma, Sri Lanka

DOI:

https://doi.org/10.21921/jas.v9i04.%2011599

Keywords:

Abrasion, Attrition, Dehulling, Design, Milling, Splitting

Abstract

Vegetable proteins occupy an important place innutritional securityin rural Sri Lanka; and theseprimarily come from different pulses and vegetables. Annual production of the traditionallygrown pulsesin the island falls shortof demand andto offsetthis deficit, a new pulse pigeonpea (Cajanus cajan), was introduced from India. This pulse found good adaptation in the Dry and Intermediate rainfall zones of the country. Since pigeonpea grains need dehulling and splitting before consumption, it was found necessary to develop a processing machine so that the farmers´produce could be converted into dal (decorticated splits) for domestic consumption and local marketing. Hence, a small-scale pigeonpea processing machine was designed and fabricated bythe Department of Agriculture, using locally available resources. This machine is simple, compact, and easy to transport and operate using domestic power supply. Besides pigeonpea, it can also process other pulses such as cowpea, green gram, and black gram. The present paper describes key features of the machine in relation to its design, fabrication, operation, and maintenance.

Author Biographies

H M NIMAL JAYANTHA, Field Crops Research and Development Institute, Department of Agriculture, MahaIlluppallamma, Sri Lanka

Senior Agriculture Engineer, Farm Mechanization Research Centre (FMRC)

K B SAXENA, Field Crops Research and Development Institute, Department of Agriculture, MahaIlluppallamma, Sri Lanka

Project Coordinator

References

Anonymous. 2013. CPE Chapter 6: Methods of milling. Short course on post-harvest processing and agro processing centers for value addition in rural areas. Post-Harvest Technology Scheme, University of Agriculture Sciences, Bangalore.

Kulkarni S D. 1989. Pulse processing machinery in India. Agric. Mech. Asia Lat. Am. 20: 42-48

Kurien PP and Parpia H A B. 1968. Pulse milling in India. Processing and milling of tur (arhar). Journal of Food Science and Technology 5: 203-207.

Saxena KB. 1999. Pigeonpea in Sri Lanka. Monograph. International Crops Research Institute for the Semi-Arid Tropics, Patancheru 502 324, A.P., India. Pp 99.

Saxena KB, Choudhary AK, Dalvi VA, Saxena RK, Ghosh J, Singh S, Verma P, and Kumar S. 2021. Pigeonpea is significantly more than just a delicious pulse. Journal of AgriSearch 8: 177-187.

Swamy R N, Ramakrishnaiah N, Purine P P, and Salimath P V. 1991. Studies on carbohydrates of red gram in relation to milling. Journal Science Food and Agriculture 57: 379-390.Vikaspedia 2022.

A portal of Government of India, Ministry of Electronics and Information Technology, Centre for Development of Advanced Computing, Hyderabad.

Downloads

Published

2023-06-28