An Improved Method of Direct Ear Head Threshing of Standing Paddy Crop through Self-Propelled Thresher
Direct Ear Head Threshing of Standing Paddy Crop
DOI:
https://doi.org/10.21921/jas.v10i02.12724Keywords:
Upright threshing, crop guiding plate, gradual feeding, reduced straw intake, self-propelled thresher.Abstract
The unique method of direct ear-head threshing was initially tested in laboratory and then implemented in the field. The direct ear head thresher was affordable for medium-scale farmers which helped in maintaining the timeliness of agricultural operations with reduced labor. It consisted of four sets of crop guiding plates, wire-loop threshing cylinder and collecting tray. The guiding plates gather the ear-heads of upright plants and gradually place them over the rotating cylinder. The grains got separated due the cylinder impact and collected in the tray placed below the cylinder. Thus the straw intake reduces during threshing. It was a self-propelled walk-behind machine equipped with a 3.7 kW gasoline engine and threshes four rows in a single pass. The performance of developed thresher was evaluated under actual field conditions. It was operated at cylinder speed and forward speed of 18.94 m s-1 and 0.8 km h-1, respectively. The threshing efficiency, grain throughput capacity, and total grain loss were 98.86%, 346.50 kg h-1, and 4.20%, respectively. The effective field capacity, fuel consumption, labor-time requirement and cost of operation were 0.065 ha h-1, 0.96 l h-1, 16 man-h ha-1 and ? 3462 ha-1, respectively.
References
Alizadeh MR and Khodabakhshipour M.2010. Effect of Threshing Drum Speed and Crop Moisture Content on the Paddy Grain Damage in Axial Flow Thresher., Agronomic Research in Moldova. Repository of Iasi University of Life Sciences, ROMANIA Vol. XLIII 43(4):144.
Amponsah SK, Addo A, Dzisi K, Moreira J and Ndindeng SA.2017. Comparative Evaluation of Mechanised and Manual Threshing Options for Amankwatia and AGRA Rice Varieties in Ghana. Journal of Agricultural Engineering 48(4):181-189.
Dash SR, Routray BK, Das H and Behera N.2021. Performance of stress tolerant rice variety swarna shreya under rainfed drought-prone areas of South Eastern Ghat Zone of Odisha of India: Stress tolerant rice for rainfed drought-prone areas. Journal of AgriSearch 8(4):360-363.
Hossain MA, Hoque MA, Wohab MA, Miah MM and Hassan MS.2015. Technical and economic performance of combined harvester in farmers field. Bangladesh Journal of Agricultural Research 40(2):291-304.
Kalsirisilp R and Singh G.2001. PM—Power and Machinery: adoption of a stripper header for a Thai-made rice combine harvester. Journal of Agricultural Engineering Research 80(2):163-172.
Khan AU.1971, Harvesting and Threshing of Paddy. Unpublished PhD Thesis. Agricultural Engineering Department. The International Rice Research Institute Los Banos, Laguna, Philippines.
Kharel L, Ghimire SK, Shrestha J, Kunwar CB and Sharma S.2018. Evaluation of rice genotypes for its response to added fertility levels and induced drought tolerance during reproductive phase: Rice genotypes responses to added fertility levels and drought. Journal of AgriSearch 5(1):13-18.
Marouze C.1989. The Rock EC 60 stripper for standing grain crops: a new harvesting technique. CEEMAT paper, Montpellier, France 1989, 47:21—28.
Murumkar RP, Dongarwar UR, Borkar PA, Pisalkar PS and Phad DS.2014. Performance Evaluation of Self-propelled Vertical Conveyor Reaper. International Journal of Science, Environment and Technology 2:1701-1705.
Singh D A and Kapoor R.2015. Transforming Agriculture Through Mechanization: A Knowledge Paper on Indian farm equipment sector. Published by FICCI, India , pp:56.
Anonymous.2014.Agriculture Machinery Manufacturers Association. International Exhibition and Conference on Agri-Machinery and Equipment. IARI, PUSA New Delhi (India) p28.
