Optimization of the operational parameters of a picking-type pneumatic planter using response surface methodology

Optimization of the operational parameters of a picking-type pneumatic planter

Abstract

Singulation of seeds has been investigated extensively by researchers all over the world and a large number of precision seeding systems with design variations have been developed for different crops. A picking type metering mechanism was developed at CAET, AAU, Godhra, Gujarat, India. The performance of the picking type seed-metering device of a pneumatic planter was investigated under laboratory conditions to optimize the operating parameters for lady's finger seeds. The picking of single seed the three operational parameters i.e. hole diameters for the nozzle: 1.0, 1.5, 2.5 and 3.0 mm; forward speed: 0.37, 0.56, 0.83, 1.11 and 1.30 m/s and vacuum pressure: 19.33, 39.32, 43.98, 58.64 and 68.63 kPa were selected for the study. The metering system of the planter was set to place the seed to seed spacing at 300 mm. The response surface methodology (RSM) technique was used to optimize the operational parameters of a precision planter. The effect of forward speed of the planter, vacuum pressure and nozzle size for picking the seed were evaluated by examining the miss index, multiple index, quality of feed index and precision. The data obtained in the experiments were used to develop functions in polynomial form using multiple regression technique. The optimum value were found to be around 0.96 m/s, 36.25 kPa and 2.0 mm of forward speed, vacuum pressure and the holes diameter of nozzle, respectively. The most important variable that governs planting phenomenon is the combination of hole diameter of nozzle and vacuum pressure accounts 89.18 per cent.

Keywords: Precision; RSM; Optimization; Picking type mechanism; CCD